Welcome to Dalian Huayang
Tel:+86-411-82364123

Search

  • Product
  • Brand
SP-200 Portable Electrochemistry Workstation

Introduction
SP-200 is the top electrochemistry workstation(Electrochemical integrated test system)
EIS capability:7MHz


Application
-Fundamental Electrochemistry
-Sensors
-Corrosion
-Electrolysis
-Environmental Electrochemistry
-Biotechnology
-Electrosynthesis
-Electroplating
-Materials
-Nanotechnology
-Fuel cell
-Battery
-Solar cell


Techniques
Voltamperometric Techniques
-Open circuit Voltage(OCV), CV, CVA, CA, CP, LASV, ACV
Impedance Spectroscopy
-GEIS,PEIS,SGEIS,SPEIS(support Mott-Schottky)
Pulsed Techniques
-DPV, SWV, NPV, RNPV, DNPV, DPA
Corrosion
-LP, GC, CPP, CPT, DP, ZRA, ZVC, VASP, CASP
Technique Builder
-Modular Potentio/Modular Galvano
-Loop,Trigger In/Trigger Out
-support kinds of techniques sequence measurement
Battery and Fuel Cell Testing
-Galvanostatic Cycling with Potential Limitation(1 to 5 of application technologies)、Potentiometric titration、Constant Load、Constant power discharge 、Current Pulse、GITT 、PITT 、I-V curves


Specification
-built-in EIS analyzer 10μHz to 7MHz
-Current Range:100pA-500mA、1μA-500mA option
-Voltage Range:+/-10V
-Resolution:300μV programmable down to 1µV  by adjusting the dynamic range
-Data acquisition rate:1,000,000points/s

Update Option
-ULC Ultra low current modular:100pA(down to 1pA)
-Built-in EIS analyzer:10μHz-7MHz


Unique Features
SP-200 is the newest, research grade, value-oriented potentiostat/galvanostat in the Bio-Logic product range.With excellent specifications in a portable chassis, the SP-200 is the perfect instruments for any application in electrochemistry especially in corrosion.The SP-200  offers outstanding features such as a floating mode, analog filtering, a built-in calibration board, and 9 stability bandwidths for a better control of the cell. Additionally, the SP-200 can be purchased with a standard DC potentiostat or an EIS capable one. There is also an Ultra Low Current (ULC) option, especially suitable for ultra low current measurment。SP-200 has a frequency up to 7MHz,is the superexcellent choice for researching special material impedance.Additionally,on-site corrosion experiments can be performed thanks to its portability.

Copyright Dalian Huayang analytical instruments Co., Ltd.All right reserved. Preparation of Liao ICP
友情链接: link1 link2 link3 link4 link5 link8 link9